GL200-06 GL200-08 GL300-10 GL400-15 airtac solenoid valve
Lubrication Gas sourse
1. The structure of oil dripping adopts gap seal type, which makes
the adjustment of oil supply more reliable.
2. Oil feed ring can only make one full turn. The quantity of oil
supply basically takes on linear distribution. The quantity of oil
supply can be generally calculated according to the position of
3. Special drip nozzle structure will produce negative pressure in
oil dripping outlet and the mist flow is minimal.
4. Filling of oil while the lubricator is under pressure is made
possible, and the oil bowl is large.
5. The bracket can be selected for installation.
|Pressure range||Semi-auto and automatic drain: 0.15~0.9 Mpa|
Manual drain: 0.05~0.9 Mpa
|Proof pressure||1.5 Mpa|
|Recommended lubricant||ISO VG 32 or equivalent|
|Capacity of drain bowl||25CC||75CC|
The products will be sent out together by TNT, Fedex, DHL, or SF
Express and so on. Of cause, if you have a special requirements, we
will do as you told.
The company for the products are brand new original products, no
second-hand and refurbished products, or leave a compensable ten
and return the full amount, but the buyer due to our purchase of
model error is not responsible for returns, another of the
company's sales of products enjoy one year from the date of
shipment quality assurance, according to the original quality
standards, during warranty with product problems, need confirmation
testing by the manufacturer, the supplier to be solved, the demand
side due to storage, use, poor maintenance caused by lower-quality
product, and not raise objections.
We can provide a series of after-sale service, such as product
introduction, mounting, debugging, technical support and so on.