Terminal wiring type 4V210 EVI7/9 Amisco Pneumatic Solenoid Coil
AC110V AC230V DC12V DC24V
The system is designed for 4V210 series Pnuematic sonlenoid valves.
All solenoids of this system have the guide tube with a diameterof
9 mm and the plunger with a diameter of 8 mm.
This type EVI7/9 could be widely used to Airtac 4V110 4V210 4V410
and 4V440 series solenoid valves.The EVI7 S9 system by AMISCO
includes a wide range of solenoids, coils and operators, designed
for pneumatic valves.
|Normal Voltage||AC220V DC24V|
|Normal Power||AC : 4-8VA DC : 4W|
|Insulation Class||F , H|
|Connection Type||Terminal wiring|
|Applicability||4V Series solenoid valves|
• Built-in magnetic yoke made by low carbon iron
• Encapsulation with high quality specially designed glass filled
nylon ( thermoset material on demand for 22 mm coil ).
• Heat resistant bobbin moulded with 30% glass filled thermoplastic
• Class H wire 200°C according to IEC 60317-13
The use of other materials is possible upon special agreements. All
coils are rated to class F and to IP 65 ( with connector ).
The coil is designed and constructed in accordance to EN 60204.1
and VDE 0580 and it is suitable for industrial ambient conditions.
For use in special ambients with high humidity, we suggest the
sealed or thermoset version
Plunger and core are made by a magnetic stainless steel specially
designed for solenoid applications.
The guide tube is made with brass ( stainless steel is possible
upon special agreement ).
The plunger is normally equipped with NBR rubber seals.
Other sealing materials like FKM are available upon demand.
The armature assembly is designed for more than 50x106 cycles.
1. Enough stock
2. Standard export package
3. High and stable quality
4. Quick delivery time
5. Best service from the whole company.