DIN43650B Amisco Pneumatic Solenoid Coil for 5/2 Way , 3/2 Way
The EVI7 S9 system by AMISCO includes a wide range of solenoids,
coils and operators, designed for pneumatic valves. All solenoids
of this system have the guide tube with a diameterof 9 mm and the
plunger with a diameter of 8 mm.
The system is designed for use with air.
This type EVI7/9 could be widely used to Airtac 4V110 4V210 4V410
and 4V440 series solenoid valves.
|Normal Voltage||AC220V DC24V|
|Normal Power||AC : 4-8VA DC : 3-8W|
|Insulation Class||F , H|
|Applicability||4VSeries solenoid valves|
• Heat resistant bobbin moulded with 30% glass filled thermoplastic
• Class H wire 200°C according to IEC 60317-13
• Built-in magnetic yoke made by low carbon iron
• Encapsulation with high quality specially designed glass filled
nylon ( thermoset material on demand for 22 mm coil ).
The use of other materials is possible upon special agreements. All
coils are rated to class F and to IP 65 ( with connector ).
The coil is designed and constructed in accordance to EN 60204.1
and VDE 0580 and it is suitable for industrial ambient conditions.
For use in special ambients with high humidity, we suggest the
sealed or thermoset version
Plunger and core are made by a magnetic stainless steel specially
designed for solenoid applications.
The guide tube is made with brass ( stainless steel is possible
upon special agreement ).
The plunger is normally equipped with NBR rubber seals.
Other sealing materials like FKM are available upon demand.
The armature assembly is designed for more than 50x106 cycles.
1. Professional workshops
2. High and stable quality
3. Quick delivery time
4. Good package in order to void the problems in transportation.
5. Best service from the whole company.