Solenoid valve coil for packing machine IP65 lead type inner
diameter 14.4mm high 41.7mm DC24V 21W
Packing machine solenoid coil by Nijia are designed for welding
machine valves . All solenoids of this system have the guide tube
with a diameter of 14.4 mm. The Plunger diameter is 10mm .
This type solenoid coil,could be widely used to F , H series
solenoid valve coil
The system is designed for use with air . Thermoset material will
help the coil more stable and safely.
|Product type||Packing machine solenoid coil|
|Insulation Class||F , H|
|Connection Type||Flying lead type|
|Applicability||packing machine series solenoid valves|
1 . class H wire 200°C according to IEC 317-13
2 . built-in magnetic yoke made by low carbon iron
3 . encapsulation with high quality specially designed glass filled
4 . heat resistant bobbin moulded with 30% glass filled
thermoplastic polyester material
The use of other materials is possible upon special agreements. All
coils are rated to class F and to IP 65 (with connector) or IP67
for the flying lead version. The coil is designed and constructed
in accordance to EN 60204.1 and VDE 0580 and it is suitable for
industrial ambient conditions. For use in special ambients with
high humidity, please, take contact with Amisco. The coil is also
in conformity with 94/9/EC ATEX for electrical apparatus of group
II, category 3 (Ex nA II 3 GD T4 o T5).
Plunger and core are made by a magnetic stainless steel specially
designed for solenoid applications.
The guide tube is made with brass ( stainless steel is possible
upon special agreement ).
The plunger is normally equipped with NBR rubber seals.
Other sealing materials like FKM are available upon demand.
The armature assembly is designed for more than 50x106 cycles.
1. High and stable quality
2. Quick delivery time
3. Enough stock
4. Good package in order to void the problems in transportation.
5. Best service from the whole company.