Amisco Solenoid valve Coil 4V110 Flying lead type EVI 7 S8 for 3/2
way normally open and normally close valves
The EVI7 S8 system by AMISCO includes a wide range of solenoid
operators designed for pneumatic valves. All solenoids of this
system have the guide tube with a diameter of 8 mm and the plunger
with a diameter of 7 mm. The system is designed for use with air.
The coil is available both in 22 mm and in 30 mm size for increased
|Normal Voltage||AC220V DC24V|
|Normal Power||AC:5VA DC:2.8W|
|Insulation Class||F , H|
|Connection Type||Flying lead type|
|Applicability||4V Series solenoid valves|
1 . heat resistant bobbin moulded with 30% glass filled
thermoplastic polyester material
2 . class H wire 200°C according to IEC 317-13
3 . built-in magnetic yoke made by low carbon iron
4 . encapsulation with high quality specially designed glass filled
The use of other materials is possible upon special agreements. All
coils are rated to class F and to IP 65 (with connector) or IP67
for the flying lead version. The coil is designed and constructed
in accordance to EN 60204.1 and VDE 0580 and it is suitable for
industrial ambient conditions. For use in special ambients with
high humidity, please, take contact with Amisco. The coil is also
in conformity with 94/9/EC ATEX for electrical apparatus of group
II, category 3 (Ex nA II 3 GD T4 o T5).
Plunger and core are made by a magnetic stainless steel specially
designed for solenoid applications.
The guide tube is made with brass ( stainless steel is possible
upon special agreement ).
The plunger is normally equipped with NBR rubber seals.
Other sealing materials like FKM are available upon demand.
The armature assembly is designed for more than 50x106 cycles.
1. Enough stock
2. High and stable quality
3. Quick delivery time
4. Good package in order to void the problems in transportation.
5. Best service from the whole company.